Submersible Liquid Level Transmitter LEET-M
SKU: LEET-M
LEET-M is a full sealed submersible level transmitter. It utilises the advanced piezo-resistive pressure sensor and high accurate measurement circuit to deliver high accuracy and very stable measurement. Integrated construction and standard signal provide the user easy and convenient installation for most applications. The special cable connects with housing, can be permanently immersed into the liquid for long time. LEET-M level transmitter has small size, light weight and good stability. It can be used for water or liquid measure and control of medicine, metallurgy, electricity, mine, city water supply and drainage, etc.
Submersed in 200m depth of Water
- Fully laser welding construction for stable operation
High reliability and stability
- Advanced Piezo-resistive technology
ATEX explosion-proof
- Explosion-proof product conforms to Ex ia ⅡC T6
4-20mA Loop powered
- Easy to connect to any PLC, system...
| Range(FS) | Select 1, 5, 10, 20, 50, 100, 200mH2O |
| Overpressure | 1.5 times FS |
| Accuracy | Range ≤ 50mH2O, accuracy +/-1.0% FS. Range ＞ 50 mH2O, accuracy +/- 0.5% FS. For 0.2% and 0.1% accuracy, please contact us |
| Stability | Range > 10mH2O, ±0.2%FS/year. Range ≤ 10mH2O, 20mmH2O/year |
| Thermal drift | Range > 10mH2O, ±0.02%FS/℃. Range ≤ 10mH2O, ±0.05%FS/℃ |
| Working temperature | -10℃~70℃, -10℃~60℃(Ex ia) |
| Storage temperature | -20℃~85℃ |
| Power supply | 11V~28VDC |
| Output signal | 4mA~20mADC(2-wire, loop powered) |
| Load | ≤(U-11)/0.02Ω |
| Housing | Stainless steel 1Cr18Ni9Ti |
| Diaphragm | Stainless steel 316L as standard, optional Tantalum |
| Cable material | φ7.5mm Polyethylene cable as standard, Optional Polyurethane cable |
| Cable length | 2M additional of FS |
| Connector | No connector - flying leads as standard, optional M12-F connector |
| Ex approval | Optional ATEX Ex ia ⅡC T6 |
| ITEM CODES | DESCRIPTIONS |
| LEET-M-01-001-SS-PE-FL | LEET-M submersible level transmitter, 316L SS diaphragm, PE cable, flying leads, 1mH20 FS |
| LEET-M-01-001-SS-PU-FL | LEET-M submersible level transmitter, 316L SS diaphragm, PU cable, flying leads, 1mH20 FS |
| LEET-M-01-001-TL-PE-FL | LEET-M submersible level transmitter, Tantalum diaphragm, PE cable, flying leads, 1mH20 FS |
| LEET-M-01-001-TL-PU-FL | LEET-M submersible level transmitter, Tantalum diaphragm, PU cable, flying leads, 1mH20 FS |
| LEET-M-01-001-SS-PE-M12 | LEET-M submersible level transmitter, 316L SS diaphragm, PE cable, M12-F connector, 1mH20 FS |
| LEET-M-01-001-SS-PU-M12 | LEET-M submersible level transmitter, 316L SS diaphragm, PU cable, M12-F connector, 1mH20 FS |
| LEET-M-01-001-TL-PE-M12 | LEET-M submersible level transmitter, Tantalum diaphragm, PE cable, M12-F connector, 1mH20 FS |
| LEET-M-01-001-TL-PU-M12 | LEET-M submersible level transmitter, Tantalum diaphragm, PU cable, M12-F connector, 1mH20 FS |
| LEET-M-02-020-SS-PU-FL | LEET-M submersible level transmitter, accuracy 0.2% FS, 316L SS diaphragm, PU cable, flying leads, 20 mH20 range |
| Notes | Replace 001 by other code for other measurement ranges as below |
| 005 - 5 mH20 | |
| 010 - 10 mH20 | |
| 020 - 20 mH20 | |
| 050 - 50 mH20 | |
| 100 - 100 mH20 | |
| 200 - 200 mH20 | |
| Please pay attention that the media should be compatible with the contacted parts (housing, diaphragm, cable) | |
| For liquid is not water, the output must be scaled to its specific density | |
| Two kinds of cable are optional, polyurethane and polyethylene. The default is polyethylene. Polyurethane cable is more flexible and endurable | |
| When the product is used in thunder storm area, we suggest the user to use protection device to protect the product and power grounding reliably |
