Fuel level sensor resistive output for GENSET
SKU: CAP10G
CAP10G is the industrial version of PulseCAP10, designed specifically for generator fuel monitoring applications. The CAP10 has 240..33 ohms resistor output allowing direct connection to a generator controller. It is compatible with most popular generator controllers on the market such as DEEPSEA, EMKO, DATAKOM, COM AP, MGS, SMART GEN, WOODWARD, POWERCOMMAND ... CAP10G with high precision up to 0.5%. Measuring range from 100mm - 3500mm. The sensor has CE EMC certification according to EN61236-1 standard.
Direct connection with Generator
- Compatible with most popular generator controllers on the market such as DEEPSEA, EMKO, DATAKOM, COM AP, MGS, SMART GEN, WOODWARD, POWERCOMMAND ...
99.5% Accuracy
- Patented digital capacitance measuring technique PulseCAP10 of Daviteq allow high accuracy
High stability
- Patented digital capacitance measuring technique PulseCAP10 of Daviteq combined with intelligent sensor structure design for high stability signal
No need Calibration after cutting
- Smart Firmware allow automatically recognize its new length after cutting. No need complicated calibration steps!!!
Easy Installation
- Smart design for easy installation and complete protection of sensor from tampering
| Sensor length | Standard 700mm, 1000mm, optional 1200 or 1500mm. Cuttable down to 200mm. Longer than 1500mm, suggest to use Industrial type sensor CAP10CN |
| Output | 240..33 ohms |
| Power supply | 8..50VDC |
| Consumption | max 20mA |
| Working pressure | -1 .. 2 barg |
| Working temperature | -40 oC .. + 85 oC |
| Accuracy | +/- 0.5% of span (at 25 oC) |
| Temperature drift | < + 0.03% of span per 10oC |
| Resolution | 1/1000 of span |
| Sensor materials | Alloy & Engineering plastic |
| Electrical connection | 3-way connector IP67 from MOLEX with 3m shielded cable as standard |
| Housing | Cast alumium, IP67 protection |
| Process connection | Plastic flange |
| Standard accessories | flange, o-ring, gasket, protection covers, self-tapping screws, twisted seal, fuse & fuse holder |
| Certification | CE-Marking per EN61236-1 (with test report) |
| ITEM CODE | DESCRIPTIONS |
| CAP10G0700FULL | CAP10G Heavy Duty Fuel Level Sensor for GENSET, 700mm, resistive output 240..33 OHM, 0.5% accuracy, 1/500 resolution, full accessories with 3m cable |
| CAP10G1000FULL | CAP10G Heavy Duty Fuel Level Sensor for GENSET, 1000mm, resistive output 240..33 OHM, 0.5% accuracy, 1/500 resolution, full accessories with 3m cable |
| CAP10G1200FULL | CAP10G Heavy Duty Fuel Level Sensor for GENSET, 1200mm, resistive output 240..33 OHM, 0.5% accuracy, 1/500 resolution, full accessories with 3m cable |
| CAP10G1500FULL | CAP10G Heavy Duty Fuel Level Sensor for GENSET, 1500mm, resistive output 240..33 OHM, 0.5% accuracy, 1/500 resolution, full accessories with 3m cable |
| CAP10PROEXT0700 | Extension Probe for CAP10, L=700mm |
| CAP10PROEXT1000 | Extension Probe for CAP10, L=1000mm |
| CAP10PROEXT1500 | Extension Probe for CAP10, L=1500mm |
| **ACCESSORIES** | |
| CAP10PROTECTSET | CAP10 protection cover set |
| CAP10PARTSKIT | CAP10 parts kit |
| CAP10INSUFLANGE | CAP10 plastic flange |
| CAP10HOUSCOVER | CAP10 housing protection cover |
| CAP10CNTCOVER | CAP10 connector protection cover |
| CAP10FOOTER-001 | CAP10 filtered footer |
| CM-CAP10LOWERGASKET2 | CAP10 rubber gasket |
| CAP10BLINDCAP | CAP10 blind cap |
