WSSFC-V1A is a cost effective, Sigfox accelerometer single-axis vibration sensor designed for condition monitoring and preventive maintenance applications. The piezo-electric accelerometer is available in ranges ±25g or 50g and features a flat frequency response up to >10kHz. Its accelerometer features a stable piezo-ceramic crystal in shear mode with low power electronics, sealed in a fully hermetic package. The Piezo Electric technology incorporated in the WSSCF-V1A accelerometer has a proven track record for offering the reliable and long-term stable output required for condition monitoring applications. The accelerometer is designed and qualified for machine health monitoring and has superior Resolution, Dynamic Range and Bandwidth to MEMS devices. Beside that it can also measure the temperature at mounting point. With Ultra-low power design and smart firmware allow the complete Wireless and Sensor package run on 2 x AA battery up to 10 years. It can support all regions of Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, RC7.
Typical Applications: Machine Health Monitoring, Predictive Maintenance Installations, Vibration Monitoring, Impact & Shock Monitoring, Bearing monitoring, ...
SENSOR SPECIFICATION: | |
Sensor technology | Hermetically Sealed, Piezo-Ceramic Crystal, Shear Mode |
8-Parameter Measurement | Acceleration RMS & Peak Velocity RMS & Peak Displacement RMS & Peak Frequency & Temperature |
Acceleration Range & Shock Limit (g) | ±25 or 50, 10,000 |
Frequency Response and Resonant (Hz) | 2-10000, > 30000 |
Non-Linearity, Transverse Sensitivity | ±2%FSO, < 5% |
Temperature measuring and operating range, accuracy & resolution (°C) | -40.. +85, +/- 0.5, 0.125 |
Sensor Material, rating and mounting | 304SUS, IP67, M6 Screw |
*Notes | All above values are typical at +24°C, 80Hz |
Connector | M12-M 5-pin (Coding A) with 2m cable, wired to Sigfox node |
SIGFOX SPECIFICATION: | |
Sigfox zones | select RC2-RC3-RC4-RC5 or RC1-RC6-RC7 |
Antenna | Internal Antenna 2 dbi |
Configuration | via offline USB cable (PC software is supplied at free) and via Downlink |
Battery | 02 x AA Type 1.5VDC, working time up to 10 years (depends on configuration) ** 7 years working with 30 minutes update, RC4, 1 x transmit |
RF Module complies to | CE, FCC, ARIB |
Working temperature | -40°C..+60°C (using Energizer Lithium Ultimate AA battery) |
Dimensions & Net-weight | H106xW73xD42, 190 grams |
Housing | Aluminum+Polycarbonate, IP67 |
Mounting | Wall mount bracket |
ITEM CODE | DESCRIPTIONS |
WSSFC-V1A-9-025 | SIGFOX PIEZO-ELECTRIC 10KHZ VIBRATION SENSOR, +/- 25G, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC2-RC3-RC4-RC5 ZONES |
WSSFC-V1A-8-025 | SIGFOX PIEZO-ELECTRIC 10KHZ VIBRATION SENSOR, +/- 25G, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC1-RC6-RC7 ZONES |