| Measurement technology | high-performance NDIR, 10 years sensor life span
|
| Measuring range | 0 - 100% flammable gas LEL, equivalent to 0-5% vol. (CH4). For C3H8, C2H4, C2H6, C4H10 gas application please contact us
|
| Resolution | Response time (T90) | 0.1% LEL / < 40 seconds
|
| Measurement variation | for CH4 it is ±0.1% vol. or ± 5% of reading (whichever is greater) in the +20...+25 °C temperature range |
| Temperature | Humidity | Operating pressure | -40 to 60°C / 0 - 98% RH, non-condensing / 80kPa to 120kPa
|
| Antenna | 2 dbi N-type antenna
|
| Sigfox Zones | RC1, RC2, RC3c, RC4
|
| Data sending mode | cyclically, or when an alarm occurs or activated by a magnetic key. Suggest up to 48 messages per day.
|
| RF module compliant | ETSI EN 300 220, EN 303 204 (Europe) FCC CFR47 Part15 (USA), ARIB STD-T108 (Japan)
|
| Configuration | via Downlink or via USB cable (PC software provided free of charge)
|
| The battery | 01 type C 3.6V LiSOCl2 battery (recommended SAFT LS26500)
|
| Equipment housing | Aluminum alloy, powder coated, IP66, Wall mount installation
|
| Certified Ex d | IMQ 14 ATEX 005 X, TÜV CY 18 ATEX 0206158 X and IECEx DEK 15.0048X
|
| Hazard Protection Label | ATEX II 2G Ex db IIC T5/T6 Gb and ATEX II 2D Ex tb IIIC T100/T85°C Db
|
| Compatible | ATEX 2014/34/EU / Standard IEC-EN60079-0 IEC-EN60079-1 IEC-EN60079-31
|
| Areas of application | Zones 1 & 2 gas hazardous areas, Zones 21 & 22 hazardous areas containing flammable dust
|
| Size | Net weight | H220xW100xD80 (not including antenna) / ~ 1500 grams (without battery) |
