Smart IoT Gateway - iConnector with integrated IO module

SKU: STHC-IO

STHC-IO is same as STHC, is a Smart IoT Gateway, aka iConnector, a main component in any IoT application. However, STHC-IO has integrated IO ports allow it to connect to sensors, meters, equipments...directly and easily. STHC-IO has compact size and light weight with IP67 protection allows installation for both indoor and outdoor. With built-in Data analytic functions, it delivers right away the useful information from the raw data of sensors/meters...This useful information will be sent back to server for data logging, data analytics, monitoring & controls...iConnector STHC-IO also support multiple Industrial Fieldbus like Modbus, EthernetIP, Profinet, CClink, Wireless sensor network...It connects to server system via LAN/WAN as Ethernet, WiFi or Cellular.

3-in-1 Device

  • iConnector is a 3-in1 device, comprises Data logger + Logic Controller + Internet Gateway

Integrated I/O Ports

  • Built-in I/O Ports 4AI/DI, 4DI, 4 relay, 1 Pulse PWM output and 1 RS485 Master ModbusRTU allows extending I/O easily

AC Power Supply

  • Integrated AC Power supply with very wide input range 85 ~ 305VAC for stable working!

NO need Programming

  • Don't need to learn any Programming language, just configure it remotely by Globiots platform

Just 2-step for using

  • Just install and configure it remotely on Globiots, then you can start use it!

Since 2014!

  • Industrial customers have been using iConnectors since 2014 because of its quality!
Host Communication Cellular typeGPRS Quadband/3G-Dual band or Penta Band (refer specification of STHC)
Host Communication Etherner type01 x RJ45 port, 10Mbps
Host Communication WiFi type802.11b/g/n, 2.4Ghz,internal antenna
GPSoption, only available on GPRS version or 3G-Penta band version, standard internall antenna or optional external antenna
Host communication supportsTCP/IP, UDP/IP, FTP, HTTPS, SNMP...
Fieldbus communcationModbusRTU x 01 port, 31 slaves, max 19.2 kpbs
Integrated I/O Module 4AI/DI, 4DI, 4 Relay, 1 Pulse PWM output (refer specification of STHM-MBIO)
Digital InputsOpto-coupler, 4.7 kohms input resisrtance, 5000V rms isolation, Logic 0 (0-1VDC), Logic 1 (5-24VDC), Functions: logic status 0/1 or Pulse counting (32 bit counter with max 4khz pulse)
Analog InputsSelect between 0-10VDC input or 0-20mA input, 12 bit Resolution, can be configured as Digital input (max 10VDC input)
Relay OutputElectro-mechanical Relays, SPDT, contact rating 250VAC/5A, LED indicators, Latch control enable
Pulse OutputOpen-collector, opto-isolation, max 10mA and 80VDC, On/off control, Pulser (max 2.5Khz, max 65535 Pulses) or PWM (max 2.5Khz)
Vietnam Type Approval CerificationQCVN 54:2011/BTTTT, QCVN 15:2015/BTTTT (DAVITEQ B00122019)
Power supply85 ~ 305VAC, 47 ~ 440Hz
Back-up batteryLithium Super Capacitor (to alert shortage of power supply)
On-board logging2MB Flash
SIM slot01 x micro-SIM (cellular versions only)
Operating Temperature-20 .. + 70 degC
Dimension & weightH230xW130xD77, < 1.5 kgs
Housing/ProtectionAluminum+Polycarbonate, IP67, wall mount pads
ITEM CODESDESCRIPTIONS
STHC-IO-ISG02DB-01-ACiConnector 3G Dual Band, internal antenna, integrated I/O with 04 relays, 4DI, 4AI/DI, 1 Pulse PWM output, RS485, power supply 85-305VAC, IP67
STHC-IO-ISG02GPS-01-ACiConnector 3G Penta Band with GPS, internal antenna, integrated I/O with 04 relays, 4DI, 4AI/DI, 1 Pulse PWM output, RS485, power supply 85-305VAC, IP67
STHC-IO-ISG02DB-01-DCiConnector 3G Dual Band, internal antenna, integrated I/O with 04 relays, 4DI, 4AI/DI, 1 Pulse PWM output, RS485, power supply 9..36VDC, IP67
STHC-IO-ISG02GPS-01-DCiConnector 3G Penta Band with GPS, internal antenna, integrated I/O with 04 relays, 4DI, 4AI/DI, 1 Pulse PWM output, RS485, power supply 9..36VDC, IP67
SIMMOBI-3GMobifone Data SIM CARD, only SMS receiving mode (Vietnam only)
SIMMOBI-10K-01Y12-month data plan for SIM CARD, unlimited data, GPRS/EDGE/UMTS/HSPA (Vietnam only)
**ACCESSORIES**
RS485-FM12-USB-1RS485/USB multi-purpose Configuration cable with connector m12 male, female and flying leads, with Power adapter 12VDC/2.0A
Notes* Purchase configuration cable RS485-FM12-USB-1 for off-line configuration of iConnector

Related products