Fuel level sensors for Vehicles

SKU: CAP10

PulseCAP10 is a Smart fuel level sensor, was invented & manufacrured since 2010, up to now there have been 50.000 pieces of sensor delivered to Vietnam, Malaysia, Singapore, Phillipines, Indonesia, India, Mexico, USA...PulseCAP10 fuel level sensor utilitizes the unique digital capacitance measuring technique of Daviteq, deliver high accuracy measurement and stability. It has multiple outputs, can work with many kind of GPS devices in over the World.

99.5% Accuracy

  • Patented digital capacitance measuring technique PulseCAP10 of Daviteq allow high accuracy

High Stability

  • Patented digital capacitance measuring technique PulseCAP10 of Daviteq with smart mechanical structure allow very high stable measuring output

No need Calibration after cutting

  • Smart Firmware allow automatically recognize its new length after cutting. No need complicated calibration steps!!!

Easy Installation

  • Smart design for easy installation and complete protection of sensor from tampering
Sensor lengthstandard 700mm, 1000mm, optional 1200 or 1500mm. Cuttable down to 200mm. Longer than 1500mm, suggest to use Industrial type sensor CAP10CN
OutputAnalog (1..5VDC), RS232 (S2 protocol), PWM
Power supply8..50VDC
Consumptionmax 15mA
Working pressure-1 .. 2 barg
Working temperature-40 oC .. + 85 oC
Accuracy+/- 0.5% of span (at 25 oC)
Temperature drift< + 0.03% of span per 10oC
Resolution1/1000 of span
Sensor materialsAlloy & Engineering plastic
Electrical connection3-way connector IP67 from MOLEX with 7m shielded cable as standard
HousingCast alumium, IP67 protection
Process connectionPlastic flange
Standard accessoriesflange, o-ring, gasket, protection covers, self-tapping screws, twisted seal, fuse & fuse holder
CertificationCE-Marking per EN61236-1 (with test report)
ITEM CODEDESCRIPTIONS
CAP10A0700FULLFuel level sensor PulseCAP10, 3-way connector, factory calibrated by standard Diesel, L = 700mm, Output 1..5VDC, with accessories and 7m cable, for transportation
CAP10A1000FULLFuel level sensor PulseCAP10, 3-way connector, factory calibrated by standard Diesel, L = 1000mm, Output 1..5VDC, with accessories and 7m cable, for transportation
CAP10A1200FULLFuel level sensor PulseCAP10, 3-way connector, factory calibrated by standard Diesel, L = 1200mm, Output 1..5VDC, with accessories and 7m cable, for transportation
CAP10A1500FULLFuel level sensor PulseCAP10, 3-way connector, factory calibrated by standard Diesel, L = 1500mm, Output 1..5VDC, with accessories and 7m cable, for transportation
CAP10S20700FULLFuel level sensor PulseCAP10, 3-way connector, factory calibrated by standard Diesel, L = 700mm, Output Serial S2, with accessories and 7m cable, for transportation
CAP10S21000FULLFuel level sensor PulseCAP10, 3-way connector, factory calibrated by standard Diesel, L = 1000mm, Output Serial S2, with accessories and 7m cable, for transportation
CAP10S21200FULLFuel level sensor PulseCAP10, 3-way connector, factory calibrated by standard Diesel, L = 1200mm, Output Serial S2, with accessories and 7m cable, for transportation
CAP10S21500FULLFuel level sensor PulseCAP10, 3-way connector, factory calibrated by standard Diesel, L = 1500mm, Output Serial S2, with accessories and 7m cable, for transportation
**ACCESSORIES**
CAP10V3CABLE7M7m shielded signal cable with 3-way Molex connector, for CAP10 Version 3.X and later
CAP10V3CABLE14M14m shielded signal cable with 3-way Molex connector, for CAP10 Version 3.X and later
CAP10V3CABLE21M21m shielded signal cable with 3-way Molex connector, for CAP10 Version 3.X and later
CAP10PROTECTSETCAP10 protection cover set
CAP10PARTSKITCAP10 parts kit
CAP10INSUFLANGECAP10 plastic flange
CAP10HOUSCOVERCAP10 housing protection cover
CAP10CNTCOVERCAP10 connector protection cover
CAP10FOOTER-001CAP10 filtered footer
CM-CAP10LOWERGASKET2CAP10 rubber gasket
CAP10BLINDCAPCAP10 blind cap

Related products