Sub-Ghz Ex d Wireless Bridges

SKU: WS433-BLEX

WS433-BLEX is a range of Sub-Ghz wireless bridges to replace the RS485 cable or network. It has Ex d approval for installation in Zone 1, Zone 2 or Safe Zone. LOS Distance is up to 6000m at baud rate 38400. This wireless technology will save time, labor cost & cable cost as well. Optional integrated IoT gateway (iConnector) allows easily configure & diagnose remotely or monitoring / controls via any IoT Platform as welll. The deployment of these wireless devices can be done in just 15 minutes!

ROBUST WIRELESS CONNECTION

  • Sub-Ghz technology from Texas Instruments delivers a Robust Wireless connection with AES-128 Security

6000M LOS DISTANCE

  • High performance engineered RF circuit to deliver the long range distance

ANY PROTOCOL! NOT only MODBUS

  • Transparent connection allows the network nodes can talk in any protocol

SIMPLE CONFIGURATION

  • Wireless Bridges are easily configured by an offline tool or remotely by online tool (Globiots)

REMOTE CONFIGURATION & DIAGNOSTIC

  • With integrated IoT Gateway (iConnector), the configuration & diagnostic of entire network can be done remotely via Globiots platform

REMOTE MONITORING & CONTROLS

  • With integrated IoT Gateway (iConnector), the wireless nodes can be monitored and controlled remotely via Globiots or any IoT platform
CommunicationRS485, RS232 (optional)
Wireless data rate50kbps (support baud rate 38400)
Tranmission distanceLOS 6000m @ 50 kpbs (lowest Antenna height is 4m)
AntennaStandard external antenna -1.1 dBi for slave node, 3.0 dbi for master node (option 6 & 9 dbi)
Power supply7..48 Vdc @ 500mA max
Electrical connection01 x M25 conduit (cable gland is not included)
RF frequency bandFree license ISM 433.92Mhz (for others 868, 915, 920Mhz, refer related datasheets)
Ready to complyETSI EN 300 220, EN 303 204 (Europe) FCC CFR47 Part15 (US), ARIB STD-T108 (Japan)**
Vietnam Type Approval CertificationQCVN 73:2013/BTTTT, QCVN 96:2015/BTTTT (DAVITEQ B00122019)
ATEX CertificatesIMQ 14 ATEX 005 X and TÜV CY 18 ATEX 0206158 X
MakringATEX II 2G Ex db IIC T5/T6 Gb and ATEX II 2D Ex tb IIIC T100/T85°C Db
DirectiveATEX 2014/34/EU
StandardsIEC-EN60079-0 IEC-EN60079-1 IEC-EN60079-31
Applicable zonesZone 1 - 21 (gas) and Zone 2 - 22 (dust)
Data encryptionAES-128
Ambient working temperature-40oC..+85oC
HousingCast aluminium, powder coated, IP66
Mountingwall mounting holes
Product dimensionsH100xW100xD80 (excluded antenna)
Net weight1.3 kgs
Packaging dimensionW160 x D150 x H100 mm
Gross weight< 1.5 kgs
ITEM CODESDESCRIPTIONS
WS433-BLEX-RS485-M3Wireless bridge, Ex d approved, Master, RS485, external antenna 3dbi with 5m RF cable
WS433-BLEX-RS485-S2Wireless bridge, Ex d approved, Slave, RS485, external integrated antenna -1.1dbi
STHC-X-ISG02DB-WS433-BLEX-RS485-M3iConnector 3G Dual Band*, Ex d, external GSM antenna 2.3 dbi N-male, RS485/ModbusRTU with built-in wireless bridge, master RS485, external antenna 3dbi with 5m RF cable
STHC-X-ISG02-WS433-BLEX-RS485-M3iConnector 3G Penta Band*, Ex d, external GSM antenna 2.3 dbi N-male, RS485/ModbusRTU with built-in wireless bridge, master RS485, external antenna 3dbi with 5m RF cable
STHC-X-ISGWF-WS433-BLEX-RS485-M3iConnector WiFi*, Ex d, external WiFi antenna 4.48 dbi N-male, RS485/ModbusRTU with built-in wireless bridge, master RS485, external antenna 3dbi with 5m RF cable
**ACCESSORIES FOR CELLULAR IOT GATEWAY (ICONNECTOR)**
SIMMOBI-3GMobifone DATA sim card, with sms (receive only), sending sms is in additional cost (for Vietnam only)
SIMMOBI-10K-01Y12-month Data plan of Mobifone sim card, unlimited data, GPRS/EDGE/UMTS/HSPA (Vietnam only)
**OPTIONAL ANTENNA & ITS ACCESSORIES**
OMB.433.B03F21433MHz 3dBi OMNI antenna, IP65, N-female, L=523mm, c/w Male-Male N-Adapter P/N 26-8009 (excluded cable)
OMB.433.B06F21433MHz 6dBi OMNI antenna, IP65, N-female, L=1094mm, c/w Male-Male N-Adapter P/N 26-8009 (excluded cable)
CAB.953Low lost antenna cable, 5m, N-female and SMA-male
ADAPT/N-TYPEM/SMAFN-male to SMA-Female adapter
**OTHER ACCESSORIES**
RS485-FM12-USB-1RS485/USB multi-purpose Configuration cable** with connector m12 male, female and flying leads, with Power adapter 12VDC/2.0A
NOTES* Refer datasheet of iConnector STHC to find more information.
** Order RS485-FM12-USB-1 to configure wireless bridge and iConnector

Related products