OptoTerminal-G75 is an Ethernet-enabled, graphics-based operator interface for use with Opto 22's SNAP PAC System and other Ethernet-based systems. The mountable display terminal is used to send commands and receive real-time data from plant floor equipment and other real-world devices connected to Opto 22 hardware for the purposes of automation, data acquisition, remote monitoring, and control.

The industrially hardened OptoTerminal-G75 offers standard TCP/IP Ethernet connectivity, an active-matrix LCD color touch screen, and easy-to-use software, and provides a durable operator interface for the plant floor and remote locations.

Recommended for use with the OptoTerminal-G75 is the OptoTermCable, a power and serial cable that is convenient for programming the terminal on a desk or other temporary location.


  OptoTerminal-G70: 256 colors, STN (passive matrix); 320 x 240 pixels at 0.36 mm dot pitch; 5.7 in. (145 mm) diagonal display; software-controllable contrast and brightness; cold-cathode fluorescent lighting.

  OptoTerminal-G75: 256 colors, TFT (active matrix); 640 x 480 pixels at 0.33 mm dot pitch; 10.4 in. (264 mm) diagonal display; software-controllable brightness; cold-cathode fluorescent lighting

   Touch Screen   Analog-resistive operation. Transparent touch area over viewable display, with a labeled touch area underlay on each side of the display.
   Interface   10 Mbps Ethernet; EIA-232 serial port


  4 MB flash; 16 MB RAM
   Speaker   Software programmable in pitch and duration

  OptoTerminal-G70: NEMA-4 front panel; glass-filled polyester, UL 94V-0 flame rating. Accommodates panels from 0 to 0.28 in. (0 to 7 mm) thick with standard screws.

  OptoTerminal-G75: NEMA-4 front panel; aluminum. Accommodates panels from 0 to 0.47 in. (0 to 12 mm) thick with standard screws.

  Size and Weight

  OptoTerminal-G70: 8.5 x 6.3 x 1.7 in. (215 x 161 x 43 mm); 2.5 lb. (1.16 kg)

  OptoTerminal-G75: 13.0 x 10.2 x 2.2 in. (330 x 260 x 55.3 mm); 6.4 lb. (2.9 kg)

   Power Requirements

  OptoTerminal-G70: 10 to 26 VDC; 450 mA @ 12 VDC or 275 mA @ 24 VDC (not including optional hardware)

  OptoTerminal-G75: 10 to 26 VDC; 1.35 A @ 12 VDC or 700 mA @ 24 VDC (not including optional hardware)

   Software   Qlarity Foundry design environment for Microsoft® Windows® and Qlarity programming language (included)
   Operating Temperature   -10 °C to 60 °C
   Storage Temperature   -20 °C to 70 °C
   Humidity   0–95%, non-condensing
   Vibration   5 to 5,000 Hz, 4 grms
   Shock   20 g, 3 ms, any axis
   Certification   FCC Part 15, Class A
  CE Certification

Bản để in